Charcoal 0 4Mpa Boiler
Even if a good charcoal 0 4mpa boiler has any problems at the time of installation, it is impossible to use it well. When installing, we need to consider a lot of problems, first of all, the installation location considerations, because the boiler is used to provide thermal energy, so the surface temperature is very high. Therefore, when installing the boiler should try to avoid contact with the human body. The installation location should be chosen around the corner or on the edge not to interfere with the passage of people, this is the first to consider when installing.
Calculation of charcoal 0 4mpa boiler chimney diameter: inner diameter of the chimney outlet of formula; D = √NV / 3600 * 0.785 * U, where D ------ chimney exit diameter, in meters; ----- root √ ( after the equation are within the radical); N ----- per hour of steam from the boiler chimney all responsible for the smoke, tonnes / hour; V ----- produce one ton of steam per hour the estimated amount of flue gas, in cubic; ----- chimney flue gas flow rate at the outlet U, in meters / second. Note; the U-value of 12 is preferably in mechanical ventilation ---- 20 m / s, operation taken at a slight positive pressure furnace 10 ----- 15 m / sec.
We produce steam charcoal 0 4mpa boiler is a very important part of the device, this provides a quick way to our gas steam boiler, after use, we found an excellent energy-saving effect boilers, flue gas discharge temperature is lower than the previous boiler equipment many, in line with national environmental provisions of the boiler equipment. --customer feedback
(2) In addition, because the outside temperature changes, resulting in the steam charcoal 0 4mpa boiler auxiliary ambient temperature and their bearing temperature changes accordingly. Should the auxiliary cooling water is the lake or river water or cycle water, the impact on the industrial steam boiler efficiency will be larger.